- Sale
- Batteries
- Oils
- Coolant fluids
- Filters
- Car care products
- Screenwash liquides
-
Hand tools
- Pneumatic tools
- Hand tools 1/4
- Hand tools 3/8
- Hand tools 1/2
- Hand tools 3/4
- Wrenches
- Screwdrivers
- Pliers
- Hand tools kits
- Kits for hand tools cabinets
- Bits
- Various hand tools
- Oil change equipment
- Working light
- Jacks
- Hand tool cabinets
- Welding equipment
- Riveters and rivets
- Cutt-off and abrasive discs
- Wire brushes
- Insulating tapes
- Gloves for work
- Equipment for tires chanhe
- Drills, Taps and Dies
- Various hand tools
- Car bulbs
- Spark plugs
- Brake pipes
- Wiper blades
- Cable ties and Hose clamps
- Fuses
News
All news
16 April 2021
KĀPĒC IZVĒLĒTIES AKUMULATORUS "MUTLU"?
16 April 2021
Batteries for boats
8 March 2021
MOTO AKUMULATORI. KVALITĀTE UN DROŠĪBA
Home-Catalog-Car care products-Corrosion protection products-Anti-gravel inside coating BOLL, amber 1 ltr.
Anti-gravel inside coating BOLL, amber 1 ltr.
- Description
- Reviews
-
BOLL ŚRODEK DO KONSERWACJI PROFILI ZAMKNIĘTYCH KAROSERII – BOLL inside coating, amber
The conservation agent for closed profiles is based on wax which develops a flexible layer protecting perfectly against water, salt and rust. It is very efficient, after use it is transparent with an amber shade.
Application: Inject the agent into existing holes in car body with a spray gun. If necessary, drill holes with the diameter of 6 mm. Before use, shake the container well for about 3 minutes. The best results are obtained at the pressure of 4 to 6 atmospheres. Clean the gun with mineral spirits after use. Optimum coat thickness: 0.2 – 0.4 mm Drying time: about 4-5 hours at 20° C.
Anti-gravel inside coating BOLL, amber 1 ltr.
EUR
8.61
EUR
10.13
BOLL ŚRODEK DO KONSERWACJI PROFILI ZAMKNIĘTYCH KAROSERII – BOLL inside coating, amber
The conservation agent for closed profiles is based on wax which develops a flexible layer protecting perfectly against water, salt and rust. It is very efficient, after use it is transparent with an amber shade.
Application: Inject the agent into existing holes in car body with a spray gun. If necessary, drill holes with the diameter of 6 mm. Before use, shake the container well for about 3 minutes. The best results are obtained at the pressure of 4 to 6 atmospheres. Clean the gun with mineral spirits after use. Optimum coat thickness: 0.2 – 0.4 mm Drying time: about 4-5 hours at 20° C.
- Personal recomendations